[ 6835.444] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 6835.444] X Protocol Version 11, Revision 0 [ 6835.444] Build Operating System: Linux 3.0.32-1-lts x86_64 [ 6835.444] Current Operating System: Linux Silmeria 3.4.4-1-ARCH #1 SMP PREEMPT Sat Jun 23 10:53:18 CEST 2012 x86_64 [ 6835.444] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4efcc574-6cb9-44da-940f-63ad4624626e ro quiet add_efi_memmap nomodeset [ 6835.444] Build Date: 30 May 2012 07:24:13PM [ 6835.444] [ 6835.444] Current version of pixman: 0.26.0 [ 6835.444] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6835.444] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6835.444] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 25 11:01:54 2012 [ 6835.444] (++) Using config file: "/etc/X11/rscr.conf" [ 6835.444] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 6835.444] (==) ServerLayout "Layout0" [ 6835.444] (**) |-->Screen "Screen0" (0) [ 6835.444] (**) | |-->Monitor "Monitor0" [ 6835.444] (**) | |-->Device "Device0" [ 6835.444] (**) |-->Input Device "Keyboard0" [ 6835.444] (**) |-->Input Device "Mouse0" [ 6835.444] (**) Option "Xinerama" "0" [ 6835.444] (==) Automatically adding devices [ 6835.444] (==) Automatically enabling devices [ 6835.444] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 6835.444] Entry deleted from font path. [ 6835.444] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 6835.444] Entry deleted from font path. [ 6835.444] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 6835.444] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/100dpi/ [ 6835.444] (==) ModulePath set to "/usr/lib/xorg/modules" [ 6835.444] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 6835.444] (WW) Disabling Keyboard0 [ 6835.444] (WW) Disabling Mouse0 [ 6835.444] (II) Loader magic: 0x7c58e0 [ 6835.444] (II) Module ABI versions: [ 6835.444] X.Org ANSI C Emulation: 0.4 [ 6835.444] X.Org Video Driver: 12.0 [ 6835.444] X.Org XInput driver : 16.0 [ 6835.444] X.Org Server Extension : 6.0 [ 6835.445] (--) PCI:*(0:1:0:0) 10de:1201:0000:0000 rev 161, Mem @ 0xf8000000/33554432, 0xc8000000/134217728, 0xd0000000/67108864, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288 [ 6835.445] (--) PCI: (0:2:0:0) 10de:1201:0000:0000 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288 [ 6835.445] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 6835.445] (II) LoadModule: "extmod" [ 6835.445] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 6835.445] (II) Module extmod: vendor="X.Org Foundation" [ 6835.445] compiled for 1.12.2, module version = 1.0.0 [ 6835.445] Module class: X.Org Server Extension [ 6835.445] ABI class: X.Org Server Extension, version 6.0 [ 6835.445] (II) Loading extension MIT-SCREEN-SAVER [ 6835.445] (II) Loading extension XFree86-VidModeExtension [ 6835.445] (II) Loading extension XFree86-DGA [ 6835.445] (II) Loading extension DPMS [ 6835.445] (II) Loading extension XVideo [ 6835.445] (II) Loading extension XVideo-MotionCompensation [ 6835.445] (II) Loading extension X-Resource [ 6835.445] (II) LoadModule: "dbe" [ 6835.445] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 6835.445] (II) Module dbe: vendor="X.Org Foundation" [ 6835.445] compiled for 1.12.2, module version = 1.0.0 [ 6835.445] Module class: X.Org Server Extension [ 6835.445] ABI class: X.Org Server Extension, version 6.0 [ 6835.445] (II) Loading extension DOUBLE-BUFFER [ 6835.445] (II) LoadModule: "glx" [ 6835.446] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 6835.456] (II) Module glx: vendor="NVIDIA Corporation" [ 6835.456] compiled for 4.0.2, module version = 1.0.0 [ 6835.456] Module class: X.Org Server Extension [ 6835.456] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 6835.456] (II) Loading extension GLX [ 6835.456] (II) LoadModule: "record" [ 6835.456] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 6835.456] (II) Module record: vendor="X.Org Foundation" [ 6835.456] compiled for 1.12.2, module version = 1.13.0 [ 6835.456] Module class: X.Org Server Extension [ 6835.456] ABI class: X.Org Server Extension, version 6.0 [ 6835.456] (II) Loading extension RECORD [ 6835.456] (II) LoadModule: "dri" [ 6835.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 6835.457] (II) Module dri: vendor="X.Org Foundation" [ 6835.457] compiled for 1.12.2, module version = 1.0.0 [ 6835.457] ABI class: X.Org Server Extension, version 6.0 [ 6835.457] (II) Loading extension XFree86-DRI [ 6835.457] (II) LoadModule: "dri2" [ 6835.457] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 6835.457] (II) Module dri2: vendor="X.Org Foundation" [ 6835.457] compiled for 1.12.2, module version = 1.2.0 [ 6835.457] ABI class: X.Org Server Extension, version 6.0 [ 6835.457] (II) Loading extension DRI2 [ 6835.457] (II) LoadModule: "nvidia" [ 6835.457] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 6835.457] (II) Module nvidia: vendor="NVIDIA Corporation" [ 6835.457] compiled for 4.0.2, module version = 1.0.0 [ 6835.457] Module class: X.Org Video Driver [ 6835.457] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012 [ 6835.457] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 6835.457] (++) using VT number 7 [ 6835.457] (II) Loading sub module "fb" [ 6835.457] (II) LoadModule: "fb" [ 6835.457] (II) Loading /usr/lib/xorg/modules/libfb.so [ 6835.458] (II) Module fb: vendor="X.Org Foundation" [ 6835.458] compiled for 1.12.2, module version = 1.0.0 [ 6835.458] ABI class: X.Org ANSI C Emulation, version 0.4 [ 6835.458] (II) Loading sub module "wfb" [ 6835.458] (II) LoadModule: "wfb" [ 6835.458] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 6835.458] (II) Module wfb: vendor="X.Org Foundation" [ 6835.458] compiled for 1.12.2, module version = 1.0.0 [ 6835.458] ABI class: X.Org ANSI C Emulation, version 0.4 [ 6835.458] (II) Loading sub module "ramdac" [ 6835.458] (II) LoadModule: "ramdac" [ 6835.458] (II) Module "ramdac" already built-in [ 6835.458] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 6835.458] (==) NVIDIA(0): RGB weight 888 [ 6835.458] (==) NVIDIA(0): Default visual is TrueColor [ 6835.458] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 6835.458] (**) NVIDIA(0): Enabling 2D acceleration [ 6836.371] (II) NVIDIA(GPU-0): Display (Acer S243HL (DFP-0)) does not support NVIDIA 3D [ 6836.371] (II) NVIDIA(GPU-0): Vision stereo. [ 6836.429] (II) NVIDIA(GPU-0): Display (Acer S243HL (DFP-2)) does not support NVIDIA 3D [ 6836.429] (II) NVIDIA(GPU-0): Vision stereo. [ 6836.430] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 (GF114) at PCI:1:0:0 (GPU-0) [ 6836.430] (--) NVIDIA(0): Memory: 1048576 kBytes [ 6836.430] (--) NVIDIA(0): VideoBIOS: 70.24.18.00.04 [ 6836.430] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 6836.430] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 6836.433] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 at PCI:1:0:0 [ 6836.433] (--) NVIDIA(0): CRT-0 [ 6836.433] (--) NVIDIA(0): CRT-1 [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-0) (connected) [ 6836.433] (--) NVIDIA(0): DFP-1 [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-2) (connected) [ 6836.433] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 6836.433] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-0): 330.0 MHz maximum pixel clock [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-0): Internal Dual Link TMDS [ 6836.433] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 6836.433] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-2): 330.0 MHz maximum pixel clock [ 6836.433] (--) NVIDIA(0): Acer S243HL (DFP-2): Internal Dual Link TMDS [ 6836.433] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 6836.433] (**) NVIDIA(0): device Acer S243HL (DFP-0) (Using EDID frequencies has [ 6836.433] (**) NVIDIA(0): been enabled on all display devices.) [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.434] (WW) NVIDIA(GPU-0): check for mode "1280x720". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check [ 6836.434] (WW) NVIDIA(GPU-0): for mode "1920x1080". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.434] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check [ 6836.434] (WW) NVIDIA(GPU-0): for mode "720x480". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check [ 6836.434] (WW) NVIDIA(GPU-0): for mode "720x480". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.434] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.434] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.434] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.434] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.434] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.434] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check [ 6836.435] (WW) NVIDIA(GPU-0): for mode "720x576". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.435] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.435] (WW) NVIDIA(GPU-0): check for mode "1280x720". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.435] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check [ 6836.435] (WW) NVIDIA(GPU-0): for mode "1920x1080". [ 6836.435] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-0) contradicts itself: mode [ 6836.435] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.435] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.435] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.435] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.436] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 6836.436] (**) NVIDIA(0): device Acer S243HL (DFP-2) (Using EDID frequencies has [ 6836.436] (**) NVIDIA(0): been enabled on all display devices.) [ 6836.436] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.436] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's [ 6836.436] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.436] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.436] (WW) NVIDIA(GPU-0): check for mode "1280x720". [ 6836.436] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.436] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.436] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.436] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check [ 6836.436] (WW) NVIDIA(GPU-0): for mode "1920x1080". [ 6836.436] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.436] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.436] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.436] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.436] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check [ 6836.437] (WW) NVIDIA(GPU-0): for mode "720x480". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check [ 6836.437] (WW) NVIDIA(GPU-0): for mode "720x480". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.437] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.437] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check [ 6836.437] (WW) NVIDIA(GPU-0): for mode "720x576". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.437] (WW) NVIDIA(GPU-0): check for mode "720x576". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.437] (WW) NVIDIA(GPU-0): check for mode "1280x720". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.437] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.437] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.437] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.437] (WW) NVIDIA(GPU-0): valid HorizSync range (30.000-80.000 kHz) would exclude [ 6836.437] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check [ 6836.437] (WW) NVIDIA(GPU-0): for mode "1920x1080". [ 6836.438] (WW) NVIDIA(GPU-0): The EDID for Acer S243HL (DFP-2) contradicts itself: mode [ 6836.438] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's [ 6836.438] (WW) NVIDIA(GPU-0): valid VertRefresh range (55.000-75.000 Hz) would exclude [ 6836.438] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh [ 6836.438] (WW) NVIDIA(GPU-0): check for mode "1920x1080". [ 6836.438] (==) NVIDIA(0): [ 6836.438] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 6836.438] (==) NVIDIA(0): will be used as the requested mode. [ 6836.438] (==) NVIDIA(0): [ 6836.439] (II) NVIDIA(0): Validated modes: [ 6836.439] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select" [ 6836.439] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080 [ 6836.464] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config [ 6836.465] (--) NVIDIA(0): option [ 6836.465] (--) Depth 24 pixmap format is 32 bpp [ 6836.923] (II) NVIDIA(GPU-1): Display (Acer S243HL (DFP-0)) does not support NVIDIA 3D [ 6836.923] (II) NVIDIA(GPU-1): Vision stereo. [ 6836.932] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 560 (GF114) at PCI:2:0:0 (GPU-1) [ 6836.932] (--) NVIDIA(GPU-1): Memory: 1048576 kBytes [ 6836.932] (--) NVIDIA(GPU-1): VideoBIOS: 70.24.18.00.04 [ 6836.932] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X [ 6836.932] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU [ 6836.932] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 560 at PCI:2:0:0 [ 6836.932] (--) NVIDIA(GPU-1): CRT-0 [ 6836.932] (--) NVIDIA(GPU-1): CRT-1 [ 6836.932] (--) NVIDIA(GPU-1): Acer S243HL (DFP-0) (connected) [ 6836.932] (--) NVIDIA(GPU-1): DFP-1 [ 6836.932] (--) NVIDIA(GPU-1): DFP-2 [ 6836.932] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock [ 6836.932] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock [ 6836.932] (--) NVIDIA(GPU-1): Acer S243HL (DFP-0): 330.0 MHz maximum pixel clock [ 6836.932] (--) NVIDIA(GPU-1): Acer S243HL (DFP-0): Internal Dual Link TMDS [ 6836.932] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock [ 6836.932] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS [ 6836.932] (--) NVIDIA(GPU-1): DFP-2: 330.0 MHz maximum pixel clock [ 6836.932] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS [ 6836.932] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory [ 6836.932] (II) NVIDIA: access. [ 6836.936] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 6836.936] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 6836.936] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 6836.936] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 6836.936] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 6836.936] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 6836.936] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 6836.936] (II) NVIDIA(0): Config Options in the README. [ 6836.938] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select" [ 6837.071] (II) Loading extension NV-GLX [ 6837.162] (==) NVIDIA(0): Disabling shared memory pixmaps [ 6837.162] (==) NVIDIA(0): Backing store disabled [ 6837.162] (==) NVIDIA(0): Silken mouse enabled [ 6837.162] (**) NVIDIA(0): DPMS enabled [ 6837.162] (II) Loading extension NV-CONTROL [ 6837.163] (II) Loading extension XINERAMA [ 6837.163] (WW) NVIDIA(0): Option "UseDBLib" is not used [ 6837.163] (II) Loading sub module "dri2" [ 6837.163] (II) LoadModule: "dri2" [ 6837.163] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 6837.163] (II) Module dri2: vendor="X.Org Foundation" [ 6837.163] compiled for 1.12.2, module version = 1.2.0 [ 6837.163] ABI class: X.Org Server Extension, version 6.0 [ 6837.163] (II) NVIDIA(0): [DRI2] Setup complete [ 6837.163] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 6837.163] (--) RandR disabled [ 6837.163] (II) Initializing built-in extension Generic Event Extension [ 6837.163] (II) Initializing built-in extension SHAPE [ 6837.163] (II) Initializing built-in extension MIT-SHM [ 6837.163] (II) Initializing built-in extension XInputExtension [ 6837.163] (II) Initializing built-in extension XTEST [ 6837.163] (II) Initializing built-in extension BIG-REQUESTS [ 6837.163] (II) Initializing built-in extension SYNC [ 6837.163] (II) Initializing built-in extension XKEYBOARD [ 6837.163] (II) Initializing built-in extension XC-MISC [ 6837.163] (II) Initializing built-in extension SECURITY [ 6837.163] (II) Initializing built-in extension XINERAMA [ 6837.163] (II) Initializing built-in extension XFIXES [ 6837.163] (II) Initializing built-in extension RENDER [ 6837.163] (II) Initializing built-in extension RANDR [ 6837.163] (II) Initializing built-in extension COMPOSITE [ 6837.163] (II) Initializing built-in extension DAMAGE [ 6837.164] (II) Initializing extension GLX [ 6837.224] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 6837.224] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6837.224] (II) LoadModule: "evdev" [ 6837.224] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6837.224] (II) Module evdev: vendor="X.Org Foundation" [ 6837.224] compiled for 1.12.0, module version = 2.7.0 [ 6837.224] Module class: X.Org XInput Driver [ 6837.224] ABI class: X.Org XInput driver, version 16.0 [ 6837.224] (II) Using input driver 'evdev' for 'Power Button' [ 6837.224] (**) Power Button: always reports core events [ 6837.224] (**) evdev: Power Button: Device: "/dev/input/event4" [ 6837.225] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6837.225] (--) evdev: Power Button: Found keys [ 6837.225] (II) evdev: Power Button: Configuring as keyboard [ 6837.225] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 6837.225] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6837.225] (**) Option "xkb_rules" "evdev" [ 6837.225] (**) Option "xkb_model" "evdev" [ 6837.225] (**) Option "xkb_layout" "us" [ 6837.244] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 6837.244] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6837.244] (II) Using input driver 'evdev' for 'Power Button' [ 6837.244] (**) Power Button: always reports core events [ 6837.244] (**) evdev: Power Button: Device: "/dev/input/event3" [ 6837.244] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6837.244] (--) evdev: Power Button: Found keys [ 6837.244] (II) evdev: Power Button: Configuring as keyboard [ 6837.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3" [ 6837.244] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 6837.244] (**) Option "xkb_rules" "evdev" [ 6837.244] (**) Option "xkb_model" "evdev" [ 6837.244] (**) Option "xkb_layout" "us" [ 6837.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13) [ 6837.244] (II) No input driver specified, ignoring this device. [ 6837.244] (II) This device may have been added with another device file. [ 6837.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14) [ 6837.245] (II) No input driver specified, ignoring this device. [ 6837.245] (II) This device may have been added with another device file. [ 6837.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15) [ 6837.245] (II) No input driver specified, ignoring this device. [ 6837.245] (II) This device may have been added with another device file. [ 6837.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16) [ 6837.245] (II) No input driver specified, ignoring this device. [ 6837.245] (II) This device may have been added with another device file. [ 6837.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17) [ 6837.245] (II) No input driver specified, ignoring this device. [ 6837.245] (II) This device may have been added with another device file. [ 6837.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18) [ 6837.245] (II) No input driver specified, ignoring this device. [ 6837.245] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.246] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12) [ 6837.246] (II) No input driver specified, ignoring this device. [ 6837.246] (II) This device may have been added with another device file. [ 6837.247] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7) [ 6837.247] (II) No input driver specified, ignoring this device. [ 6837.247] (II) This device may have been added with another device file. [ 6837.247] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8) [ 6837.247] (II) No input driver specified, ignoring this device. [ 6837.247] (II) This device may have been added with another device file. [ 6837.247] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9) [ 6837.247] (II) No input driver specified, ignoring this device. [ 6837.247] (II) This device may have been added with another device file. [ 6837.247] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event0) [ 6837.247] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 6837.247] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard' [ 6837.247] (**) TypeMatrix.com USB Keyboard: always reports core events [ 6837.247] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event0" [ 6837.247] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030 [ 6837.247] (--) evdev: TypeMatrix.com USB Keyboard: Found keys [ 6837.247] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard [ 6837.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input0/event0" [ 6837.247] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 8) [ 6837.247] (**) Option "xkb_rules" "evdev" [ 6837.247] (**) Option "xkb_model" "evdev" [ 6837.247] (**) Option "xkb_layout" "us" [ 6837.248] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event1) [ 6837.248] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 6837.248] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard' [ 6837.248] (**) TypeMatrix.com USB Keyboard: always reports core events [ 6837.248] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event1" [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030 [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Found 1 mouse buttons [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Found scroll wheel(s) [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Found relative axes [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: Forcing relative x/y axes to exist. [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Found absolute axes [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: Forcing absolute x/y axes to exist. [ 6837.248] (--) evdev: TypeMatrix.com USB Keyboard: Found keys [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as mouse [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: Adding scrollwheel support [ 6837.248] (**) evdev: TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5 [ 6837.248] (**) evdev: TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6837.248] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input1/event1" [ 6837.248] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 9) [ 6837.248] (**) Option "xkb_rules" "evdev" [ 6837.248] (**) Option "xkb_model" "evdev" [ 6837.248] (**) Option "xkb_layout" "us" [ 6837.248] (II) evdev: TypeMatrix.com USB Keyboard: initialized for relative axes. [ 6837.248] (WW) evdev: TypeMatrix.com USB Keyboard: ignoring absolute axes. [ 6837.248] (**) TypeMatrix.com USB Keyboard: (accel) keeping acceleration scheme 1 [ 6837.248] (**) TypeMatrix.com USB Keyboard: (accel) acceleration profile 0 [ 6837.248] (**) TypeMatrix.com USB Keyboard: (accel) acceleration factor: 2.000 [ 6837.248] (**) TypeMatrix.com USB Keyboard: (accel) acceleration threshold: 4 [ 6837.248] (II) config/udev: Adding input device Microsoft Microsoft® Comfort Mouse 4500 (/dev/input/event2) [ 6837.248] (**) Microsoft Microsoft® Comfort Mouse 4500: Applying InputClass "evdev pointer catchall" [ 6837.248] (**) Microsoft Microsoft® Comfort Mouse 4500: Applying InputClass "evdev keyboard catchall" [ 6837.248] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Comfort Mouse 4500' [ 6837.248] (**) Microsoft Microsoft® Comfort Mouse 4500: always reports core events [ 6837.248] (**) evdev: Microsoft Microsoft® Comfort Mouse 4500: Device: "/dev/input/event2" [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Vendor 0x45e Product 0x76c [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found 9 mouse buttons [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found scroll wheel(s) [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found relative axes [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found x and y relative axes [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found absolute axes [ 6837.248] (II) evdev: Microsoft Microsoft® Comfort Mouse 4500: Forcing absolute x/y axes to exist. [ 6837.248] (--) evdev: Microsoft Microsoft® Comfort Mouse 4500: Found keys [ 6837.248] (II) evdev: Microsoft Microsoft® Comfort Mouse 4500: Configuring as mouse [ 6837.248] (II) evdev: Microsoft Microsoft® Comfort Mouse 4500: Configuring as keyboard [ 6837.248] (II) evdev: Microsoft Microsoft® Comfort Mouse 4500: Adding scrollwheel support [ 6837.248] (**) evdev: Microsoft Microsoft® Comfort Mouse 4500: YAxisMapping: buttons 4 and 5 [ 6837.248] (**) evdev: Microsoft Microsoft® Comfort Mouse 4500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6837.249] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input2/event2" [ 6837.249] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Comfort Mouse 4500" (type: KEYBOARD, id 10) [ 6837.249] (**) Option "xkb_rules" "evdev" [ 6837.249] (**) Option "xkb_model" "evdev" [ 6837.249] (**) Option "xkb_layout" "us" [ 6837.249] (II) evdev: Microsoft Microsoft® Comfort Mouse 4500: initialized for relative axes. [ 6837.249] (WW) evdev: Microsoft Microsoft® Comfort Mouse 4500: ignoring absolute axes. [ 6837.249] (**) Microsoft Microsoft® Comfort Mouse 4500: (accel) keeping acceleration scheme 1 [ 6837.249] (**) Microsoft Microsoft® Comfort Mouse 4500: (accel) acceleration profile 0 [ 6837.249] (**) Microsoft Microsoft® Comfort Mouse 4500: (accel) acceleration factor: 2.000 [ 6837.249] (**) Microsoft Microsoft® Comfort Mouse 4500: (accel) acceleration threshold: 4 [ 6837.249] (II) config/udev: Adding input device Microsoft Microsoft® Comfort Mouse 4500 (/dev/input/mouse0) [ 6837.249] (II) No input driver specified, ignoring this device. [ 6837.249] (II) This device may have been added with another device file. [ 6837.249] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 6837.249] (II) No input driver specified, ignoring this device. [ 6837.249] (II) This device may have been added with another device file.